Wheel Chasers

Mastering Your Hyundai Elantra’s Fuel System: Understanding Maintenance and Tips

Getting to know your car is essential for safe and efficient driving. One important aspect is understanding the fuel type and capacity.

In this article, we will explore the fuel type and capacity of the Hyundai Elantra, one of the most popular cars on the market. We will also provide a step-by-step guide on how to open the gas tank of a 2017 Hyundai Elantra.

Understanding the Fuel Type and Capacity of the Hyundai Elantra

The Hyundai Elantra has been a popular car for many years. It is known for its sleek design, excellent fuel economy, and affordable price.

When it comes to fuel, the Hyundai Elantra comes with two engine options: a 2.0-liter four-cylinder engine and a 1.4-liter turbocharged four-cylinder engine. The 2.0-liter engine runs on regular unleaded gasoline and has a fuel capacity of 14 gallons.

This engine is found in the SE, SEL, and Value editions of the Elantra. The 1.4-liter turbocharged four-cylinder engine, on the other hand, runs on premium unleaded gasoline and has a fuel capacity of 13.2 gallons.

This engine is found in the Eco and Limited editions of the Elantra. The fuel economy of the Hyundai Elantra varies depending on the engine and trim level.

The 2.0-liter engine has an EPA-estimated fuel economy of 31 MPG in the city and 41 MPG on the highway. The 1.4-liter turbocharged engine has an EPA-estimated fuel economy of 33 MPG in the city and 40 MPG on the highway.

It is important to note that using the recommended fuel type for your car is crucial. Failure to use the recommended fuel can cause engine problems and may void your warranty.

Opening the Gas Tank of a 2017 Hyundai Elantra

Now that we know the fuel type and capacity of the Hyundai Elantra let’s take a look at how to open the gas tank of the 2017 model. The process is relatively simple and straightforward.

Step 1: Make sure your car is parked in a safe location. Turn off the engine and locate the gas tank door release lever.

The release lever is usually located on the driver’s side near the floor. Step 2: Pull the gas tank door release lever.

This will pop open the gas tank door. The lever is designed to release the gas tank door without you having to exit the car.

Step 3: Once the gas tank door is open, locate the gas cap. The gas cap is located on the inside of the gas tank door.

Step 4: Turn the gas cap counterclockwise to unscrew it. The gas cap is designed to be unscrewed by hand, so you don’t need a tool.

Step 5: Set the gas cap aside and fill your gas tank with the recommended fuel type. Be careful not to overfill the tank, as that can cause fuel to spill out.

Step 6: Once you have filled the tank, screw the gas cap back on by turning it clockwise until it clicks. This ensures that the gas cap is securely in place.

Step 7: Close the gas tank door by pushing it back into place until you hear a click. This ensures that the gas tank door is securely closed.


Knowing the fuel type and capacity of your car is essential for safe and efficient driving. Understanding the fuel type of the Hyundai Elantra is no different.

Using the proper fuel type for your Elantra can help prevent engine problems and improve fuel economy. Additionally, knowing how to open the gas tank of your car is an important part of car ownership.

By following the steps outlined in this article, you can easily open the gas tank of your 2017 Hyundai Elantra and fill it with the proper fuel.

Common Issues with the Gas Tank and how to Troubleshoot Them

Gas tanks are an important component of any car’s fuel system, and a problem with them can lead to severe issues. The Hyundai Elantra is one of the most popular cars on the market, and as such, it is essential to know the common issues with the gas tank and how to troubleshoot them.

1. Gas Cap Issues

One common problem is issues with the gas cap.

If the gas cap is not tightly closed, the fuel tank may not pressurize properly, causing the check engine light to come on. If you suspect that the problem is the gas cap, check it for any visible damage or debris that could be interfering with it.

If the cap is damaged or dirty, clean it thoroughly or replace it with a new one. 2.

Fuel Tank Leaks

Fuel tank leaks are another common issue with gas tanks that can lead to substantial fuel loss. There are several reasons for fuel tank leaks, such as corrosion, cracked fuel tank or fuel line issues.

If you notice a strange smell of gas or see that the fuel gauge drops faster than usual, it could be an indication of fuel tank leakage. If this happens, it is essential to bring the car to a certified mechanic immediately.

3. Fuel Pump Issues

Fuel pump issues are another common problem with gas tanks that require immediate attention.

Fuel pumps are responsible for moving fuel from the tank to the engine. If the fuel pump is compromised, you may experience rough acceleration, engine stalling or, even worse, the car won’t start.

The fuel pump could fail due to several reasons, including contamination or clogged fuel filters. If you suspect an issue with the fuel pump, it’s important to have it checked by a mechanic.

Safety Precautions to Take when Handling the Gas Tank of a Hyundai Elantra

Safety is paramount when handling fuel, so it is vital to take the necessary precautions when working with the gas tank of a Hyundai Elantra. 1.

Wear Protective Gear

Ensure you wear protective gear such as gloves and safety glasses to protect your skin and eyes from gasoline spills or splashes. 2.

Work in a Well-Ventilated Area

Gas fumes can be hazardous to your health. When working with fuel, it’s crucial to work in a well-ventilated area or outside in an open space.

3. Keep Flames and Sparks Away from the Tank

Gasoline is highly flammable, and you must keep any flames or sparks away from the gas tank.

This means not smoking, avoiding static electricity and flame-producing tools. 4.

Turn off the Engine and Wait for the Car to Cool Down

Before opening the gas tank, ensure that the engine is turned off and wait for the car to cool down. This is important because gasoline and other parts of the fuel system can be extremely hot and potentially dangerous.

5. Use a Funnel

Using a funnel when filling up the gas tank can help prevent spills or overflows, which can be hazardous.


In conclusion, the gas tank is an essential part of a car’s fuel system, and it’s crucial to keep it in good condition. Knowing the common problems and how to troubleshoot them can help you handle gas tank issues in your Hyundai Elantra promptly.

Additionally, observing the necessary safety precautions when working with fuel is the key to preventing accidents and maintaining overall safety.

Maintenance Tips for Keeping the Gas Tank in Good Condition

A well-maintained gas tank is crucial for a car’s fuel system’s overall performance. Here are some tips on how to maintain and keep your Hyundai Elantra gas tank in good condition:


Regularly Check the Gas Cap

Ensure that the gas cap is tightly secured to the gas tank to prevent any fume evaporation, dust, or dirt from entering the gas tank. Regularly cleaning the gas cap and ensuring that it closes correctly can go a long way in preventing fuel system issues.

2. Inspect for Fuel Leaks

Check the gas tank and fuel lines for any possible leaks, including corrosion around the tank’s surface.

Always be on the lookout for any visible cracks or holes that could be affecting the fuel system’s performance. 3.

Clean the Fuel System

Cleaning the fuel system is essential to ensure optimal performance for your Hyundai Elantra. Consider using a fuel system cleaner that can help remove any buildup from the fuel lines and injectors, which helps to keep the engine running efficiently.

4. Keep the Tank Filled

It is essential to keep your gas tank full to prevent any condensation build-up inside the fuel tank that can lead to rust.

A full tank also minimizes the exposure to air inside the tank, reducing the impact of fume evaporation.

How to Refill the Gas Tank of a 2017 Hyundai Elantra at a Gas Station

Refilling the gas tank of your Hyundai Elantra is pretty straightforward, and it is something that you can do on your own. Here’s how you can refill the tank at a gas station.

1. Stop the Car at the Gas Station Pump

Drive to a gas station with your Hyundai Elantra.

Turn the engine off and park the vehicle so that it’s close enough to the gas pump for the fuel hose to reach the car’s inlet port. 2.

Open the Gas Tank Door

Open the gas tank door, which is located on the side of the car, near the back wheel. You can do this by pulling on the gas tank door release lever located on the driver’s side by the floor.

3. Open the Gas Cap

Remove the gas cap by turning it counterclockwise, and ensure that you place it somewhere clean and off the ground, so as not to get dirt on the cap’s surface.

It’s also wise to ensure that the cap is securely shut after removing it. 4.

Insert the Pump into the Inlet Port

Insert the nozzle of the gas pump into the gas inlet port of the car until it clicks. 5.

Release the Fuel

Press the button that starts the flow of fuel in the gas pump handle, and wait for the fuel to fill the tank. You can keep track of how much you are pumping by looking at the pump’s display screen.

6. Pay and Replace the Gas Cap

Once done, stop the fuel flow by pressing the nozzle’s stop button and pay for the fuel using your preferred payment method.

Finally, replace the gas cap and ensure that it is firmly closed to prevent evaporation and dirt.


Maintaining and keeping your Hyundai Elantra gas tank in good condition is crucial for the car’s fuel system to function optimally. By regularly checking the gas cap, inspecting for fuel leaks, cleaning the fuel system and keeping the tank filled, you can prevent any fuel system issues.

Additionally, refilling the gas tank of your 2017 Hyundai Elantra is straightforward, and as long as you follow the steps, you can safely refill your gas tank at any gas station. Fuel Efficiency Tips to Maximize the Elantra’s Gas Mileage

The Hyundai Elantra is known for its excellent fuel economy, but there are certain steps you can take to maximize its gas mileage even further.

Here are some fuel efficiency tips to help you get the most out of your Elantra:

1. Gentle Acceleration and Deceleration

Avoid rapid acceleration and deceleration as it uses more fuel.

Instead, try to accelerate and decelerate in a gradual and smooth manner. This allows the engine to operate more efficiently and can significantly improve fuel economy.

2. Maintain a Consistent Speed

Whenever possible, try to maintain a consistent speed while driving.

Constantly speeding up and slowing down can increase fuel consumption. Using cruise control on highways or open roads can help you maintain a steady speed, optimizing fuel efficiency.

3. Avoid Excessive Idling

Idling for long periods of time wastes fuel unnecessarily.

If you anticipate being stationary for more than a minute, it’s better to turn off the engine and restart it when you’re ready to move again. This fuel-saving technique can be especially useful in situations such as waiting at a long traffic light or in a drive-thru line.

4. Remove Excess Weight

Carrying unnecessary weight in your Hyundai Elantra can decrease fuel efficiency.

Take some time to clean out the trunk and remove any unnecessary items. The lighter your vehicle, the less energy it needs to move, resulting in improved gas mileage.

5. Use the Correct Fuel Grade

Always use the recommended fuel grade for your Elantra.

Using a higher octane fuel than required does not provide any significant benefits and can be a waste of money. Conversely, using a lower octane fuel than recommended can lead to engine knocking and reduced fuel economy.

6. Proper Tire Inflation

Keeping your tires properly inflated is essential for fuel efficiency.

Underinflated tires create more rolling resistance, requiring more fuel to propel the vehicle. Regularly check and maintain the recommended tire pressure for your Elantra based on the manufacturer’s guidelines.

7. Regular Maintenance

Keeping up with regular maintenance is crucial for optimum fuel efficiency.

Follow the maintenance schedule outlined in your Elantra’s owner’s manual, which includes oil changes, air filter replacements, and spark plug inspections. Neglecting these maintenance tasks can negatively impact fuel economy.

Compatible Fuel Additives to Improve the Car’s Performance

While using fuel additives is not necessary for the Hyundai Elantra, some drivers may choose to use them to improve the car’s performance. Here are a few compatible fuel additives that can potentially enhance your Elantra’s performance:


Fuel System Cleaner

Using a fuel system cleaner can help remove carbon deposits and other impurities from the fuel injectors, intake valves, and combustion chambers. This can lead to better fuel atomization, improved combustion, and potentially increased fuel efficiency.

However, it is essential to choose a fuel system cleaner that is compatible with your Elantra’s fuel system and follow the manufacturer’s instructions. 2.

Octane Boosters

Octane boosters are used to increase the octane rating of the fuel and can potentially improve engine performance. However, it is important to check if using octane boosters is recommended for your Elantra and to follow the manufacturer’s instructions precisely.

Using an octane booster that is not compatible with your vehicle could have negative effects on engine performance and could potentially void your warranty. 3.

Fuel Stabilizers

If you plan on storing your Elantra for an extended period or if you have concerns about fuel degradation, you may consider using a fuel stabilizer. Fuel stabilizers help prevent the breakdown of fuel components, which can occur when fuel sits stagnant for too long.

This can be particularly useful for seasonal vehicles or if you plan on leaving your car unused for an extended period. It is important to note that not all vehicles may require or benefit from the use of fuel additives.

Before using any fuel additive, it is recommended to read the owner’s manual or consult with a Hyundai certified mechanic to determine if it is compatible with your Elantra and if it will provide any noticeable benefits.


Maximizing your Hyundai Elantra’s fuel efficiency allows you to save money at the pump and reduce your environmental footprint. By adopting fuel efficiency practices such as gentle acceleration and deceleration, consistent speed maintenance, and avoiding excessive idling, you can optimize your Elantra’s gas mileage.

Additionally, by maintaining a properly inflated tire, removing excess weight, and using the correct fuel grade, you can further enhance your vehicle’s fuel efficiency. While fuel additives may not be necessary for the Elantra, certain compatible ones like fuel system cleaners, octane boosters, and fuel stabilizers can potentially enhance performance.

Before using any fuel additive, it is crucial to ensure compatibility and follow the manufacturer’s instructions. The Impact of Fuel Quality on the Hyundai Elantra’s Engine

Fuel quality plays a significant role in the performance and longevity of a car’s engine, including the Hyundai Elantra.

Here’s how fuel quality can impact the Elantra’s engine:

1. Combustion Efficiency

Fuel quality affects the combustion process within the engine.

Lower-quality fuels may contain impurities, such as dirt, water, or excessive sulfur, which can hinder proper combustion. These impurities can accumulate in the fuel injectors, intake valves, and combustion chambers, leading to reduced fuel efficiency and engine performance.

Using high-quality fuel with fewer impurities helps maintain optimal combustion efficiency in the Elantra’s engine. 2.

Fuel System Performance

The fuel system, including the fuel pump, fuel injectors, and fuel filters, relies on clean and high-quality fuel for optimal performance. Contaminated fuel can lead to clogging or malfunctioning of these components, causing a decrease in engine performance, rough idling, or difficulty starting the engine.

High-quality fuel helps keep the fuel system clean and functioning properly, improving the overall performance of the Elantra’s engine. 3.

Engine Deposits

Poor fuel quality can result in the formation of engine deposits over time. These deposits can accumulate on the intake valves, fuel injectors, and combustion chambers, leading to reduced fuel flow, inefficient atomization, and decreased engine performance.

Deposits can also increase the risk of engine knocking or pinging. Using high-quality fuel with proper detergents can help prevent the formation of these deposits and keep the engine running smoothly.

4. Emissions and Environmental Impact

Fuel quality directly affects the emissions produced by a vehicle.

Lower-quality fuels with higher sulfur content can lead to increased emissions of harmful pollutants, such as sulfur dioxide and nitrogen oxide. In contrast, high-quality fuels with lower sulfur content contribute to reduced emissions, helping to protect the environment and improve air quality.

The Hyundai Elantra, like any modern vehicle, is designed to meet stricter emission standards, and using high-quality fuel ensures that the engine operates within those standards. How to Check the Gas Tank’s Level and Monitor Fuel Consumption

Monitoring your Hyundai Elantra’s gas tank level and keeping track of fuel consumption can be helpful in managing fuel efficiency.

Here’s how you can check the gas tank’s level and monitor fuel consumption:

1. Fuel Gauge

The most common and convenient way to check the gas tank’s level is through the fuel gauge on the dashboard.

The fuel gauge provides a visual representation of the amount of fuel remaining in the tank. Familiarize yourself with the gauge markings, such as Empty, 1/4, 1/2, and Full, to estimate the fuel level accurately.

2. Trip Meter

The trip meter on the dashboard of your Elantra helps monitor fuel consumption.

Reset the trip meter at each refueling so that it starts counting from zero. As you drive, keep track of the number of miles or kilometers covered.

When you refill the gas tank, divide the distance traveled by the amount of fuel added to calculate your fuel consumption in miles per gallon (MPG) or liters per kilometer. 3.

Mobile Apps and Fuel Consumption Trackers

Various mobile apps and fuel consumption trackers are available to monitor fuel consumption more precisely. These apps use your vehicle’s data or manual inputs to calculate fuel efficiency and provide additional insights, such as average MPG, real-time fuel consumption, and cost analysis.

Some apps also provide tips and recommendations for improving fuel efficiency based on your driving habits. 4.

Manual Calculation

For a more accurate measurement of fuel consumption, you can manually calculate it using the odometer and the amount of fuel added during refueling. Start with a full tank and zero the trip meter.

Drive until you need to refill the gas tank, noting the distance covered. Divide the distance by the amount of fuel added to calculate your fuel consumption.

5. Driving Patterns and Observations

Your driving patterns and observations can also give you an idea of your fuel consumption.

If you notice frequent visits to the gas station or a significant decrease in mileage per tank, it may indicate an issue that requires attention, such as a drop in fuel efficiency, driving habits, or vehicle maintenance.


Understanding the impact of fuel quality on the Hyundai Elantra’s engine is essential for maintaining optimal performance. Choosing high-quality fuel and regular maintenance help ensure the engine runs efficiently and prolongs its lifespan.

Monitoring the gas tank’s level and keeping track of fuel consumption allows you to manage and improve fuel efficiency. Whether through the fuel gauge, trip meter, mobile apps, or manual calculation, staying aware of fuel consumption helps you make informed decisions regarding driving habits and potential maintenance needs.

By taking these steps, you can maximize the fuel efficiency of your Hyundai Elantra and enjoy a smoother and more efficient driving experience. The Role of the Fuel Pump in the Elantra’s Gas System and How to Maintain It

The fuel pump plays a vital role in the Hyundai Elantra’s gas system.

It is responsible for delivering fuel from the gas tank to the engine, ensuring a steady and consistent flow of fuel. Understanding the importance of the fuel pump and how to maintain it can help optimize the performance of your Elantra.

1. Fuel Pump Function

The fuel pump in the Elantra is an electric pump located inside the fuel tank.

Its primary function is to provide a pressurized flow of fuel to the engine. As you turn the ignition on, the fuel pump activates, pressurizing the fuel system.

This pressurized fuel is then delivered to the engine through the fuel lines, where it is mixed with air and ignited to generate power and drive the car. 2.

Maintaining the Fuel Pump

Proper maintenance of the fuel pump is crucial for its smooth operation and the overall performance of your Elantra. Here are some maintenance tips to keep the fuel pump in good condition:

– Use Quality Fuel: Using high-quality fuel, preferably Hyundai-approved fuel, helps prevent the accumulation of contaminants and impurities that can clog or damage the fuel pump.

Lower-quality fuels may contain higher levels of impurities, leading to reduced fuel pump performance over time. – Regularly Change the Fuel Filter: The fuel filter helps protect the fuel pump from dirt, rust, and other contaminants.

Over time, the fuel filter can become clogged, impeding fuel flow and increasing stress on the fuel pump. Following the manufacturer’s recommended maintenance schedule, replacing the fuel filter at the appropriate intervals is essential for the fuel pump’s optimal performance.

– Avoid Running on Low Fuel Levels: Running on low fuel levels can cause the fuel pump to work harder. It is advisable to maintain a sufficient amount of fuel in the tank to keep the fuel pump submerged in fuel, as this helps regulate its temperature and prevents it from overheating.

– Avoid Frequently Running on Empty: Running the Elantra on an empty fuel tank occasionally is generally okay; however, doing it frequently may cause the fuel pump to run hotter and increase the risk of premature wear. Ensuring that the fuel tank is filled regularly reduces stress on the fuel pump, helping prolong its lifespan.

– Be Aware of Warning Signs: Pay attention to any warning signs that may indicate fuel pump issues. These include engine misfires, difficulty starting the engine, decreased power, or sputtering during acceleration.

If you experience any of these symptoms, it is essential to have the fuel pump inspected and serviced by a qualified technician.

Advantages of Using Hyundai-Approved Fuel for Your Elantra

Using Hyundai-approved fuel for your Elantra offers multiple advantages. Here are some key benefits of using fuel recommended by Hyundai:


Optimal Performance: Hyundai vehicles, including the Elantra, are designed and engineered to maximize performance using specific fuel formulations. Using Hyundai-approved fuel ensures that your Elantra operates at its best, delivering the desired performance, fuel efficiency, and emissions compliance.

2. Engine Protection: Hyundai-approved fuel is formulated to meet the specific requirements of the Elantra’s engine.

It contains detergents and additives designed to clean and protect critical engine components, such as fuel injectors, intake valves, and combustion chambers. This helps prevent deposits, carbon buildup, and other issues that may negatively impact engine performance and longevity.

3. Fuel Efficiency: Using the recommended fuel grade and type helps optimize fuel efficiency in the Elantra.

The engine management system in Hyundai vehicles is calibrated to work with specific fuel characteristics, ensuring efficient combustion and better mileage. Utilizing the correct fuel type can enhance your Elantra’s fuel economy, saving you money at the pump.

4. Warranty Coverage: By using Hyundai-approved fuel, you can ensure that your Elantra remains compliant with the manufacturer’s warranty requirements.

In case of any fuel-related issues, warranty coverage may be affected if non-recommended or lower-quality fuels are used. Following the guidelines provided by Hyundai helps maintain your warranty and protects you against potential expenses related to fuel system repairs.

5. Environmental Considerations: Hyundai-approved fuel is also engineered to minimize environmental impact.

It contains lower levels of pollutants, such as sulfur and other harmful emissions, contributing to improved air quality and reducing the car’s carbon footprint. It is essential to consult your Elantra’s owner’s manual or contact a Hyundai dealership to identify the recommended fuel type and grade for your specific model and year.

Following these recommendations will help you gain the maximum advantages of using Hyundai-approved fuel and ensure optimal performance and longevity for your Elantra’s engine.


Understanding the role of the fuel pump in the Elantra’s gas system and how to maintain it is important for ensuring optimal performance and longevity. Regular maintenance, including using quality fuel, changing the fuel filter as recommended, and avoiding low fuel levels, helps keep the fuel pump in good condition.

Additionally, using Hyundai-approved fuel provides multiple advantages, including optimal performance, engine protection, fuel efficiency, warranty coverage, and environmental considerations. By following these guidelines and utilizing approved fuel, you can maintain your Elantra’s fuel system’s health and enhance the overall performance of your car.

How to Clean and Protect the Exterior of the Gas Tank

Cleaning and protecting the exterior of the gas tank not only enhances the appearance of your Hyundai Elantra but also helps prevent damage and maintain its overall condition. Here’s how you can properly clean and protect the exterior of the gas tank:


Gather the Necessary Supplies

To clean and protect the exterior of the gas tank, you will need the following supplies:

– Mild soap or car wash solution

– Microfiber cloths or a soft sponge

– Bucket of water

– Water hose or pressure washer (optional)

– Automotive wax or sealant

– Applicator pad or microfiber towel for waxing

2. Preparation

Park your Elantra in a shaded area to prevent the cleaning solutions from drying too quickly and leaving residue.

Make sure the car’s engine and gas tank are cool to the touch before beginning the cleaning process. 3.

Rinse with Water

Using a water hose or pressure washer set to a gentle spray, rinse off any loose dirt or debris from the gas tank’s exterior. This helps loosen and remove surface contaminants before you proceed with washing.

4. Washing

Fill a bucket with water and add a small amount of mild soap or car wash solution.

Dip a microfiber cloth or a soft sponge into the soapy water and gently wash the exterior of the gas tank. Begin at the top and work your way down, using light pressure.

Be cautious around any fuel lines or connections to prevent damage. 5.

Rinse Thoroughly

After washing, rinse off the soap residue from the gas tank using a water hose or pressure washer. Ensure that all the soap is completely rinsed off, as any remaining residue can leave streaks or marks on the tank’s surface.

6. Drying

Use a clean and dry microfiber cloth to dry the exterior of the gas tank.

Make sure to remove any water droplets or moisture, paying attention to seams or crevices where water may accumulate. 7.

Apply Automotive Wax or Sealant

To protect the exterior of the gas tank and enhance its shine, apply automotive wax or sealant following the manufacturer’s instructions. Use an applicator pad or a clean microfiber towel to apply the wax or sealant in circular motions.

Allow the product to dry as specified before proceeding to the next step. 8.


Using a clean microfiber towel, gently buff the wax or sealant off the gas tank’s surface, revealing a polished finish. Make sure to remove any excess product and achieve a smooth and even appearance.

Factors to Consider When Replacing the Gas Tank of a Hyundai Elantra

At times, it may become necessary to replace the gas tank of your Hyundai Elantra due to damage, leaks, or other issues. When considering gas tank replacement, it’s essential to take the following factors into account:


Genuine OEM or Aftermarket Tanks

When seeking a replacement gas tank, you have the option of choosing either genuine Original Equipment Manufacturer (OEM) tanks or aftermarket tanks. Genuine OEM tanks are manufactured by Hyundai and specifically designed for your Elantra model.

They ensure proper fitment, compatibility, and alignment with your vehicle’s fuel system. Aftermarket tanks, on the other hand, are produced by third-party manufacturers.

While often more affordable, they may not offer the same level of quality assurance as OEM tanks. Consider the pros and cons of each option and choose the one that best suits your needs and budget.

2. Quality and Durability

Regardless of whether you choose an OEM or aftermarket gas tank, prioritize quality and durability.

Look for tanks constructed from corrosion-resistant materials that meet or exceed industry standards. A high-quality gas tank will offer better long-term reliability, preventing potential leaks and maintaining the integrity of the fuel system.

3. Compatibility and Fitment

Ensure that the replacement gas tank is compatible with your specific Hyundai Elantra model and year.

Gas tanks can vary in size, fittings, and design across different years and trims. Review the specifications and consult with a reputable parts supplier or a profe

Popular Posts