Wheel Chasers

Fuel Efficiency Face-Off: Comparing the MPG of the 2020 Toyota Tacoma to Other Midsize Trucks

2020 Toyota Tacoma MPG Compared to Other Midsize Trucks

If you’re in the market for a new midsize truck, it’s important to consider the fuel efficiency of the options available. The 2020 Toyota Tacoma is a popular choice among consumers, known for its reliability, off-road capabilities, and modern features.

But how does its fuel efficiency stack up against other midsize trucks? Let’s take a closer look.

According to the US Department of Energy, the 2020 Toyota Tacoma has an estimated fuel economy of 20 mpg in the city and 23 mpg on the highway. This is based on a four-cylinder, manual transmission model with two-wheel drive.

If you opt for the V6 engine, automatic transmission, or four-wheel drive, your fuel efficiency will likely be slightly lower. So, how does this compare to other midsize trucks on the market?

Here’s a quick rundown of some popular options:

– 2020 Chevrolet Colorado: 18-20 mpg city, 24-30 mpg highway

– 2020 Ford Ranger: 21-23 mpg city, 26-26 mpg highway

– 2020 GMC Canyon: 18-20 mpg city, 24-30 mpg highway

– 2020 Honda Ridgeline: 19 mpg city, 24 mpg highway

– 2020 Jeep Gladiator: 16-18 mpg city, 22-23 mpg highway

– 2020 Nissan Frontier: 16-19 mpg city, 21-23 mpg highway

As you can see, the Toyota Tacoma’s fuel efficiency is competitive with other midsize trucks on the market. However, it’s worth noting that fuel economy can vary depending on a number of factors.

Factors That Affect Tacoma’s Fuel Efficiency

1. Engine and Transmission

As mentioned, the fuel efficiency of the 2020 Toyota Tacoma can vary depending on the engine and transmission options you choose.

The base model comes with a 2.7-liter four-cylinder engine that produces 159 horsepower and 180 lb-ft of torque. This engine is paired with a six-speed automatic or manual transmission.

If you upgrade to the V6 engine, you’ll get a 3.5-liter V6 that produces 278 horsepower and 265 lb-ft of torque. This engine is only available with a six-speed automatic transmission.

It’s important to note that the V6 engine may offer more power and towing capacity, but it will also use more fuel. If you’re prioritizing fuel efficiency, the four-cylinder engine may be a better choice.

Similarly, opting for a manual transmission over an automatic can improve fuel economy, as manual transmissions tend to be more efficient. 2.

Four-Wheel Drive

If you plan on using your Tacoma for off-roading or frequently driving in slippery conditions, you may need four-wheel drive. However, this option can also impact fuel economy.

According to Toyota, opting for four-wheel drive reduces fuel economy by an estimated 2-3 mpg compared to two-wheel drive. This is due to the added weight and complexity of the four-wheel drive system.

3. Driving Habits

Your own driving habits can also impact the fuel efficiency of your Tacoma.

Consistently accelerating quickly, braking harshly, or idling for long periods can all reduce fuel economy. To maximize your fuel efficiency, try to drive more smoothly.

Accelerate gradually, maintain a steady speed, and anticipate stops so you can brake gently. Additionally, turn off your engine if you’re going to be stopped for more than a minute or two.

4. Maintenance

Finally, proper maintenance of your Tacoma can help improve fuel efficiency.

Regularly replacing your air filter, keeping your tires properly inflated, and using the recommended motor oil can all help your truck run more efficiently.

Conclusion

If you’re in the market for a midsize truck, fuel efficiency is an important consideration. While the 2020 Toyota Tacoma’s fuel economy is competitive with other options on the market, it’s important to keep in mind that mileage can vary depending on engine and transmission options, four-wheel drive, driving habits, and maintenance.

By choosing the right options and driving carefully, you can maximize your Tacoma’s fuel efficiency and save money at the gas pump. 3.

Best Driving Practices for Better MPG

Fuel economy is an important consideration for many drivers, as it can affect both your wallet and the environment. While the fuel efficiency of your vehicle does depend on various factors such as the engine, transmission, and model, there are some driving practices you can adopt to improve your MPG (miles per gallon) rating.

Here are some of the best driving practices for better fuel economy:

1. Avoid Aggressive Driving

Aggressive driving, such as speeding, rapid acceleration, and hard braking, can significantly reduce fuel economy.

According to the U.S. Department of Energy, aggressive driving can lower your MPG rating by as much as 15% to 30% at highway speeds and 10% to 40% in stop-and-go traffic. To avoid aggressive driving, try to accelerate gradually, maintain a steady speed, and anticipate stops so you can ease off the gas pedal and brake gently.

Additionally, driving at or below the speed limit can help you save fuel and avoid the risk of getting a speeding ticket. 2.

Use Cruise Control

Using cruise control can help improve fuel economy, especially on long drives on flat terrain. This is because the system maintains a steady speed, reducing the need for sudden acceleration and allowing your engine to operate more efficiently.

Additionally, using cruise control can help you avoid speeding, as you can set your desired speed within the legal limit. However, it’s important to note that using cruise control on hilly or curvy roads can actually reduce fuel economy, as the system will tend to downshift to maintain the set speed.

3. Maintain a Healthy Vehicle

A well-maintained vehicle can operate more efficiently than one that’s neglected.

Regular oil changes, tire rotations, and air filter replacements can all help improve fuel economy. Additionally, keeping your tires properly inflated can reduce rolling resistance, which can improve fuel efficiency by up to 3%.

4. Minimize Idling

Idling your vehicle can use a lot of fuel, especially if you leave it running for extended periods of time.

If you’re going to be stopped for more than a minute or two, turn off your engine. Additionally, avoid drive-through lines and parking your vehicle in spots where you’ll need to idle for long periods of time.

Overall, adopting these best driving practices can help you improve your MPG rating and save money on gas, while also reducing your carbon footprint. 4.

How Aerodynamics Affect Fuel Consumption

A vehicle’s aerodynamics can significantly impact fuel economy. Aerodynamics is the study of how air flows around objects, and a vehicle’s shape and design can affect how air moves around it.

Here are some ways in which aerodynamics can affect fuel consumption:

1. Drag

Drag is the force that resists the motion of an object through a fluid, such as air.

At high speeds, the air resistance or drag on a vehicle can increase significantly, which can reduce fuel economy. This is because the engine has to work harder to overcome the drag force.

To reduce drag, vehicles are designed with streamlined shapes and aerodynamic features such as air dams and spoilers. Some modern vehicles also feature active aerodynamics, which automatically adjusts the vehicle’s shape to minimize drag.

2. Turbulence

Turbulence is a type of chaotic flow that can occur when air moves around a vehicle.

Turbulence can create pockets of low pressure behind the vehicle, which can increase drag and reduce fuel economy. To reduce turbulence, car manufacturers design vehicles with smooth, uninterrupted lines.

This can include features such as flush-mounted windows, underbody covers and deflectors, and aerodynamic mirrors. 3.

Rolling Resistance

Rolling resistance is the force that opposes the motion of a vehicle’s wheels when it rolls along a surface. This is created by the friction between the tires and the road surface.

To reduce rolling resistance, car manufacturers design vehicles with wheels and tires that are optimized for low friction. This can include features such as using larger-diameter wheels with low-profile tires, lowering the vehicle’s weight, and using lightweight materials such as aluminum and carbon fiber.

4. Vehicle Size

The size and weight of a vehicle can also affect its aerodynamics and fuel economy.

As a general rule, larger and heavier vehicles will have more drag and more rolling resistance than smaller and lighter vehicles. This can result in lower fuel economy.

To address this, car manufacturers have been designing smaller, more aerodynamic vehicles, and using lightweight materials to reduce weight and improve fuel efficiency.

Conclusion

A vehicle’s aerodynamics can significantly affect fuel economy. By understanding and optimizing aerodynamics, car manufacturers can improve the fuel efficiency of their vehicles, while also reducing emissions.

As a driver, you can also take steps to improve fuel economy by adopting best driving practices and maintaining your vehicle properly. By doing so, you can save money on gas and reduce your environmental impact.

5. Impact of Payload and Towing on Fuel Economy

The amount of weight your vehicle is carrying, either in the form of passengers or cargo, can have a significant impact on its fuel economy.

Similarly, towing a trailer can also reduce fuel efficiency. Here’s how payload and towing can affect your vehicle’s MPG.

1. Payload

Payload is the weight of the passengers and cargo that your vehicle is carrying.

The more weight your vehicle is carrying, the harder the engine has to work, which can decrease fuel economy. To improve fuel efficiency with a heavy payload, ensure that your tires are properly inflated and that your vehicle is well-maintained.

You may also consider using a roof rack or cargo carrier to keep the weight off the interior of your vehicle, which can reduce drag and improve fuel efficiency. 2.

Towing

Towing a trailer can have a significant impact on your vehicle’s fuel economy. This is because the added weight of the trailer requires more power from the engine, which can decrease fuel efficiency.

To improve fuel efficiency while towing, it’s important to ensure that your vehicle is properly equipped for the weight. You should also drive at a steady and consistent speed and avoid sudden accelerations or hard braking.

If your vehicle has a tow/haul mode, consider using this setting, as it can optimize the transmission’s gear ratios to better handle heavier loads. Overall, if you plan on carrying a heavy load or towing a trailer, it’s important to consider the impact on your vehicle’s fuel economy and adjust your driving accordingly.

6. Driving Modes That Enhance Fuel Efficiency

Many modern vehicles come equipped with different driving modes, which can optimize the engine performance to improve fuel efficiency.

Here are some of the most common driving modes and how they work. 1.

Eco Mode

Eco mode is a driving mode that optimizes the vehicle’s engine and transmission performance to reduce fuel consumption. This mode can adjust the engine’s power output and shift points to provide the best possible fuel efficiency.

When driving in eco mode, you’ll likely notice that the engine feels less powerful and that the throttle response is slower. This is because the mode is focused on providing the best possible fuel economy rather than performance.

2. Sport Mode

Sport mode is a driving mode that enhances the vehicle’s performance by providing more aggressive throttle response and shift points.

This mode can make the vehicle feel more powerful and responsive, but it can also reduce fuel economy. When driving in sport mode, the engine will rev higher before shifting gears, which can increase fuel consumption.

However, this mode can be beneficial for short bursts of high-performance driving, such as merging onto a highway or overtaking another vehicle. 3.

Normal Mode

Normal driving mode is the default mode for most vehicles, providing a balance between performance and fuel efficiency. This mode is designed to provide the most comfortable and efficient driving experience for the average driver.

When driving in normal mode, the engine and transmission will adjust their performance based on the driving conditions and the driver’s inputs. This mode can be beneficial for everyday driving, as it provides a good balance between power and fuel efficiency.

4. Electric Mode

Electric mode is a driving mode found in many hybrid and electric vehicles.

When driving in electric mode, the vehicle’s electric motor provides power to the wheels, while the gasoline engine remains inactive. This mode can provide the best possible fuel efficiency, as the vehicle is using electricity rather than gas to power the engine.

However, electric mode is typically only available for short periods of time or at low speeds, as the battery’s range is limited.

Conclusion

By using driving modes that optimize engine performance based on your driving conditions and preferences, you can improve your fuel efficiency. Additionally, understanding how payload and towing affect your vehicle’s fuel economy can help you make more informed decisions when carrying heavy loads or towing trailers.

By adopting these best practices, you can reduce your environmental impact and save money on gas. 7.

Fuel-Saving Modifications for the Tacoma

Are you a proud owner of a Toyota Tacoma and looking to improve its fuel efficiency even further? Fortunately, there are several fuel-saving modifications you can make to your Tacoma to maximize its MPG.

Let’s explore some of these modifications:

1. Aerodynamic Enhancements

Adding aerodynamic enhancements to your Tacoma can help reduce drag, which in turn improves fuel economy.

Consider installing accessories like a tonneau cover, which can reduce wind resistance and improve aerodynamics. Furthermore, adding a front air dam or wind deflectors can also help optimize airflow around your truck, minimizing turbulence and reducing drag.

2. Low Rolling Resistance Tires

Replacing your Tacoma’s tires with low rolling resistance tires can have a positive impact on fuel efficiency.

These tires are specifically designed to minimize friction, allowing for smoother and more efficient rolling. With reduced resistance, your engine won’t have to work as hard, resulting in improved fuel economy.

However, it’s important to note that low rolling resistance tires may slightly sacrifice traction and performance, so consider your driving needs and conditions before making this modification. 3.

Engine Tuning or Performance Chip

An engine tuning or installing a performance chip can optimize the engine’s performance, leading to better fuel efficiency. These modifications adjust certain parameters, such as air-fuel mixture, throttle response, and shift points, to achieve the most efficient operation.

While these modifications can provide gains in fuel economy, it’s essential to consult with a reputable tuner or professional to ensure optimal results without sacrificing engine reliability. 4.

Spark Plugs and Air Filters

Regularly replacing spark plugs and air filters can significantly improve fuel economy in your Tacoma. Fresh spark plugs provide a stronger spark, ensuring complete combustion of fuel, which leads to better efficiency.

Additionally, clean air filters promote proper airflow to the engine, preventing fuel inefficiency caused by restricted air supply. Follow the manufacturer’s recommendations for replacement intervals and opt for high-quality spark plugs and air filters for optimal performance.

5. Lighten the Load

Removing unnecessary weight from your Tacoma can improve fuel economy, as the engine won’t have to exert extra effort to move excess weight.

Clean out your truck bed, remove any heavy accessories or equipment that you don’t need, and avoid using unnecessary roof racks or cargo carriers when they’re not in use. By lightening the load, you can maximize fuel efficiency.

8. How Hybrid/Electric Trucks Compare to the Tacoma in Terms of MPG

Hybrid and electric trucks have gained popularity in recent years as eco-friendly alternatives to traditional gasoline-powered trucks.

While the Toyota Tacoma is not available as a hybrid or fully electric model, there are other trucks on the market that offer these options. Here’s a comparison of hybrid/electric trucks with the Tacoma in terms of MPG:

1.

Ford F-150 Hybrid: The Ford F-150 Hybrid is the first hybrid full-size truck on the market. Its estimated MPG ratings range from 24-25 mpg combined, depending on the specific model and configuration.

The hybrid system allows for electric-only driving at low speeds and assists the gasoline engine for improved efficiency. 2.

Rivian R1T: The Rivian R1T is an all-electric truck that boasts impressive performance and range. While exact MPG ratings are not applicable to electric vehicles, the R1T has an estimated range of up to 400 miles on a single charge.

This translates to exceptional efficiency for an electric truck, allowing for significant energy savings. 3.

GMC Hummer EV: The upcoming GMC Hummer EV is set to be released as an all-electric truck with remarkable performance and range capabilities. While specific MPG ratings are not yet available, early estimates suggest a range of over 350 miles on a single charge.

This showcases the potential for electric trucks to offer both power and efficiency. It’s important to note that hybrid and electric trucks have different powertrain technologies and efficiency ratings compared to traditional gasoline trucks like the Tacoma.

While the Tacoma may not match the efficiency of these alternative fuel options, it still offers respectable fuel economy within the midsize truck segment.

Conclusion

By making fuel-saving modifications to your Toyota Tacoma, you can further enhance its fuel efficiency. From aerodynamic enhancements to choosing the right tires and performing regular maintenance, these modifications can make a difference.

While hybrid and electric trucks offer even greater fuel efficiency, the Toyota Tacoma remains a reliable and capable option for those looking for a midsize truck. Consider your needs, driving habits, and environmental impact when deciding which fuel-saving measures and truck options are best suited for you.

9. Gas Prices and the Total Ownership Cost of the Tacoma

When considering the total ownership cost of a vehicle like the Toyota Tacoma, one must not overlook the impact of fluctuating gas prices.

Gas prices can have a significant effect on the overall expenses associated with owning and operating a vehicle. Let’s explore how gas prices influence the total ownership cost of the Tacoma and some strategies for managing these costs.

1. Fuel Efficiency

The first aspect to consider is the Tacoma’s fuel efficiency.

As we discussed earlier, the Tacoma has an estimated fuel economy of 20 mpg in the city and 23 mpg on the highway. However, it’s important to remember that these figures can vary depending on factors such as engine size and driving conditions.

When gas prices are high, a less fuel-efficient vehicle can lead to a larger portion of your budget being allocated towards fuel. On the other hand, a more fuel-efficient vehicle like the Tacoma can help mitigate the impact of rising fuel prices by requiring less frequent visits to the pump.

2. Commuting and Mileage

If you have a long commute or frequently travel long distances, gas prices can significantly impact your overall ownership costs.

Higher gas prices can translate into substantial expenses, especially if you rely heavily on your Tacoma for daily commuting or long road trips. It is worth considering alternative transportation options when gas prices rise.

Carpooling, utilizing public transportation, or incorporating telecommuting can help reduce your reliance on your vehicle and ultimately lower fuel expenses. 3.

Fuel Savings Strategies

When gas prices are high, adopting fuel-saving strategies can help minimize the impact on your pocket. Here are a few tips to consider:

– Drive conservatively: Avoid aggressive acceleration, sudden braking, and high speeds.

These habits can decrease fuel efficiency and increase your fuel expenses. – Plan your trips: Combine multiple errands into one trip, plan the most efficient routes, and minimize unnecessary driving.

Efficient planning can reduce mileage and ultimately save on fuel costs. – Car maintenance: Regular maintenance, such as oil changes, air filter replacements, and tire rotations, can help maintain optimal fuel efficiency.

Ensuring your Tacoma is in top shape will maximize fuel savings. – Consider fuel rewards programs: Many gas stations offer rewards programs that can help you save money on each gallon of fuel purchased.

Look for opportunities to earn discounts or cashback on your fuel purchases. 10.

How Gasoline Quality Affects Engine Performance and Fuel Economy

Gasoline quality plays a crucial role in the engine performance and fuel economy of any vehicle, including the Toyota Tacoma. Let’s delve into how gasoline quality affects the Tacoma and what you can do to ensure optimal engine performance and fuel efficiency.

1. Octane Rating

Gasoline octane ratings represent its resistance to pre-ignition or knocking.

The Tacoma, like most vehicles, requires gasoline with a specific octane rating. Using gasoline with a lower octane rating than recommended can lead to knocking, reduced engine performance, and potentially increased fuel consumption.

It is crucial to follow the manufacturer’s recommended octane rating for your Tacoma to ensure optimal performance and fuel efficiency. Using higher-octane fuel where not required provides no added benefits and only adds unnecessary expense.

2. Fuel Additives and Detergents

Different gasoline brands incorporate various additives and detergents to enhance engine cleanliness and efficiency.

These additives can help prevent the buildup of deposits on fuel injectors and intake valves, which can negatively impact fuel economy and engine performance over time. Using gasolines with higher-quality additives and detergents can help maintain the cleanliness of your Tacoma’s fuel system, potentially improving fuel efficiency.

When choosing a gasoline brand, look for options that explicitly mention their cleaning properties and adhere to industry standards. 3.

Ethanol Content

Ethanol is a biofuel commonly blended with gasoline. While most vehicles, including the Tacoma, are compatible with fuel blends containing up to 10% ethanol (E10), higher ethanol blends like E15 or E85 may not be recommended or approved by the manufacturer.

Using fuel blends with higher ethanol content than recommended can negatively impact fuel economy and vehicle performance. It is essential to consult the vehicle owner’s manual or contact the manufacturer to determine the approved fuel blends for your Tacoma.

Conclusion

Considering the impact of gas prices and gasoline quality on the total ownership cost of your Toyota Tacoma is crucial when managing expenses. While fuel efficiency and mileage play important roles, employing fuel-saving strategies and using high-quality gasoline can help optimize engine performance and fuel economy.

By being mindful of these factors and making informed decisions, you can strike a balance between cost-effectiveness and a satisfying ownership experience with your Tacoma. 11.

Expected Fuel Mileage Throughout the Life of the Truck

When purchasing a vehicle like the Toyota Tacoma, it’s natural to wonder about its expected fuel mileage throughout its lifespan. While it’s challenging to predict exact figures, there are factors to consider when estimating fuel mileage over the life of your truck.

1. Break-In Period

During the first few thousand miles of owning a new Tacoma, you may notice a slight increase in fuel consumption compared to later stages of its life.

This is due to the engine and other components adjusting and settling into their optimal performance. 2.

Regular Maintenance

Consistently maintaining your Tacoma will help ensure that it remains efficient throughout its life. Regular oil changes, air filter replacements, and spark plug inspections or replacements can help maintain fuel economy.

Additionally, staying on top of tire maintenance, such as proper inflation and alignment, can further maximize fuel efficiency. 3.

Fuel System Cleaning

Over time, deposits can accumulate in the fuel system, which can hinder performance and decrease fuel mileage. Incorporating periodic fuel system cleanings or using fuel additives that help keep the fuel system clean can contribute to maintaining optimal fuel mileage.

4. Environmental Factors

Remember that real-world fuel mileage can be influenced by various environmental factors, such as driving conditions, traffic congestion, and weather conditions.

City driving typically results in lower fuel efficiency due to frequent stops and acceleration, while highway driving offers better mileage as the truck can maintain a steady speed. Driving in extreme weather conditions, such as extremely hot or cold temperatures, can also affect fuel economy.

Engine warming up during cold starts and increased use of air conditioning in hot weather can lead to decreased mileage. 5.

Driving Habits

Your driving habits also play a significant role in fuel mileage. Aggressive driving, speeding, rapid acceleration, and hard braking can all decrease fuel efficiency.

By adopting fuel-saving driving habits, such as driving at a consistent speed, anticipating stops, and avoiding unnecessary idling, you can help maximize fuel mileage throughout the life of your Tacoma. Ultimately, the expected fuel mileage throughout the life of your truck will vary depending on these factors, along with your specific driving patterns and conditions.

Regular maintenance, mindful driving practices, and awareness of environmental and external factors can all contribute to maintaining optimal fuel economy. 12.

Efficient Accessories for Upsizing Tacoma’s MPG

If you’re looking to increase the fuel efficiency of your Toyota Tacoma, there are several accessories you can consider that can help optimize MPG. These efficient accessories are designed to improve aerodynamics, reduce weight, and enhance overall performance.

Let’s explore some of the options available:

1. Tonneau Covers

Installing a tonneau cover on the bed of your Tacoma can improve its aerodynamics and reduce drag, resulting in improved fuel efficiency.

Tonneau covers come in various styles, such as folding, roll-up, or retractable, allowing for easy access to the bed while providing aerodynamic benefits. 2.

Bed Extenders

Using a bed extender can help increase the cargo-carrying capacity of your Tacoma without sacrificing aerodynamics. By keeping your cargo within the bed of the truck, you prevent wind resistance caused by items hanging over the sides of the vehicle.

This improves airflow and helps maintain optimal fuel efficiency. 3.

Low-Profile Roof Racks

If you frequently need to transport equipment or gear on top of your Tacoma, consider opting for a low-profile roof rack. These racks minimize drag and air resistance, ensuring that your truck maintains better aerodynamics.

Additionally, ensure that any items secured to the roof rack do not exceed the roofline to minimize drag and maximize efficiency. 4.

Performance Air Filters

Replacing your stock air filter with a high-performance air filter can enhance airflow to the engine, thereby improving fuel efficiency. Performance air filters, such as those made of cotton gauze or foam, can increase the volume of air reaching the engine while maintaining filtration efficiency.

This allows the engine to operate more efficiently and potentially improve fuel mileage. 5.

Lightweight Wheels

Upgrading to lightweight wheels can reduce unsprung weight, which refers to the weight that is not supported by the vehicle’s suspension system. Lighter wheels require less energy to rotate, resulting in improved fuel economy.

However, it’s essential to strike a balance between weight reduction and durability to ensure the safety and longevity of your wheels. 6.

Tire Selection

Choosing low rolling resistance tires can further optimize fuel efficiency. Low rolling resistance tires are designed to reduce friction between the tires and the road, allowing for smoother rolling and improved fuel economy.

Ensure that the selected tires meet the required load capacity and specifications for your Tacoma while considering variables such as tread life and traction. Remember, while these efficient accessories can enhance fuel economy, their impact may vary depending on driving conditions, driving habits, and the overall vehicle setup.

Consider your specific needs, consult with professionals, and ensure that any modifications are compatible with your Tacoma to maximize efficiency without compromising safety or performance. 13.

EPA Ratings vs Actual MPG: What to Expect with the Tacoma

When considering fuel efficiency, it’s important to understand the difference between the EPA ratings and actual MPG (miles per gallon) you may experience with your Toyota Tacoma. The EPA (Environmental Protection Agency) provides standardized fuel economy ratings for vehicles, but real-world driving conditions can vary significantly.

Here’s what to expect with the Tacoma when comparing EPA ratings to actual MPG. 1.

EPA Fuel Economy Ratings

The EPA conducts tests to determine fuel economy ratings for vehicles, including the Toyota Tacoma. These ratings provide a baseline for comparing the fuel efficiency of different vehicles and help consumers make informed purchasing decisions.

The EPA ratings for the Tacoma are typically available for city, highway, and combined driving cycles. For example, the 2020 Toyota Tacoma with a four-cylinder engine and two-wheel drive has an EPA rating of 20 mpg in the city, 23 mpg on the highway, and a combined rating of 21 mpg.

2. Factors Affecting Actual MPG

It’s important to note that the EPA ratings serve as a reference point but might not always reflect your actual fuel economy.

Several factors can influence the real-world MPG you’ll achieve with your Tacoma, including:

a) Driving Habits and Conditions: Aggressive driving, frequent idling in traffic, and rapid acceleration can all decrease fuel efficiency. Conversely, driving conservative

Popular Posts